Alternative Components

 

Alternative Components

Plant picture

Quality Fabricated Tube and Wire Products

Tube & wire fabricating is the specialty at Alternative Components. Fabricating capabilities include a wide range of processes including but not limited to the following: Bending (CNC rotary draw or vertical press), End forming, Press forming, Punching & Notching, welding & Brazing, Assembly & Staking operations, Tube Machining, and small scale Tube Hydroform. Product tube size ranges from 0.75mm [0.030”] to 175mm [7.000”] diameter and above for some operations. Tube wall thickness may range from 0.15mm [0.006”] to 12.0mm [0.500”]. Wire diameters up to 9.0mm [0.375”] may be fabricated. Materials include but are not limited to: LC steel, HSLA, SS steel (most grades), Copper, Brass, Aluminum, Titanium, and Incoloy. Combining these in house capabilities with other locally available processes   (i.e. laser & water jet cutting, powder coat paint, and heat treating) allows Alternative Components to be a total turnkey source for fabricated tube and wire product.

Product Diversity

Some of the fabricated tube products made at Alternative Components are shown below. many of the parts are automotive, such as the seat frame, fuel fill tube and Prowler luggage rack. Many others are non automotive such as the gas furnace burner, and the gas mask water tube.

Parts made at Alternative Components

 

About Us | Privacy Policy | Contact Us